This patch replaces the following patches:

1320, 1399, 1444, 1551, 1601

This patch has no known incompatiblities with other patches.

This patch fixes the following bugs:

365105 - PC Card Reader - Files Written On Cards Not Shown
387193 - mediad needs to change to support SoftWindows95
395568 - mediad_get_exclusiveuse fails for iso CD-ROMs w/ patch 1399
398686 - Manual Eject Floppy Will Require A Notifier Window
419211 - mediad in IRIX 6.2 does not work with Teac SCSI floppy drive.
588005 - Security hole in mediad present in IRIX 6.X and kudzu

1. Patch SG0003192 Release Note

       This release note describes patch SG0003192 to IRIX 6.2.

       Patch SG0003192 replaces patches SG0001320, SG0001399,
       SG0001444, SG0001551, and SG0001601.

       This patch contains bug fixes for all platforms, and makes
       sure that mediad handles Teac Drives correctly, with respect
       to software eject mounts/dismounts

       This patch contains bug fixes for removable media software
       on a system running IRIX 6.2.  The software cannot be
       installed on other configurations.

       This patch contains fixes for the following bugs in IRIX 6.2
       Bug numbers from Silicon Graphics bug tracking system are
       included for reference.

          o Mediad incorrectly dismounts and remounts floppy media
            present in a Teac drive when a software eject is
            issued, even when media hasn't changed (bug #419211).

          o Eject does not inform user that Teac floppy can not
            hardware eject.  (bug #398686).

          o Mediad incorrectly reports PC Cards as unformatted
            after a reboot (bug #365105).

          o Mediad does not share ISO-9660 CD-ROMs with
            SoftWindows95 (bug #387193).

          o Mediad does not allow Softwindows95 to take exclusive
            use of CD-ROM drive while an ISO-9660 CD-ROM is mounted
            (bug 395568).

          o mediad security problem. (bug #588005) (Note: a
            complete fix for bug #588005 with respect to ISO9660
            CD-ROMs also requires a mount_iso9660 fix contained in
            patch 3190.)

       This patch release includes these subsystems:

          o patchSG0003192.eoe_sw.rm_media

       Because you want to install only the patches for problems
       you have encountered, patch software is not installed by
       default.  After reading the descriptions of the bugs fixed
       in this patch (see Section 1.3), determine the patches that
       meet your specific needs.

       If, after reading Sections 1.1 and 1.2 of these release
       notes, you are unsure whether your hardware and software
       meet the requirements for installing a particular patch, run
       inst.  The inst program does not allow you to install
       patches that are incompatible with your hardware or
       software.

       Patch software is installed like any other Silicon Graphics
       software product.  Follow the instructions in your Software
       Installation Administrator's Guide to bring up the miniroot
       form of the software installation tools.

       Follow these steps to select a patch for installation:

         1.  At the Inst> prompt, type

             install patchSGxxxxxxx

             where xxxxxxx is the patch number.

         2.  Initiate the installation sequence. Type

             Inst> go

         3.  You may find that two patches have been marked as
             incompatible.  (The installation tools reject an
             installation request if an incompatibility is
             detected.)  If this occurs, you must deselect one of
             the patches.

             Inst> keep patchSGxxxxxxx

             where xxxxxxx is the patch number.

         4.  After completing the installation process, exit the
             inst program by typing


             Inst> quit

       To remove a patch, use the versions remove command as you
       would for any other software subsystem.  The removal process
       reinstates the original version of software unless you have
       specifically removed the patch history from your system.

       versions remove patchSGxxxxxxx

       where xxxxxxx is the patch number.

       To keep a patch but increase your disk space, use the
       versions removehist command to remove the patch history.

       versions removehist patchSGxxxxxxx

       where xxxxxxx is the patch number.

No Requirements Information Available.

These checksums help to provide a 'signature' for the patch inst image which can be used to authenticate other inst images. You can obtain this kind of output by running sum -r on the image (from the command line):

47927      3   patchSG0003192
60164     13   patchSG0003192.eoe_man
10318    160   patchSG0003192.eoe_sw
30067      2   patchSG0003192.idb

The following lists the files which get installed from each subsystem in the patch:

patchSG0003192.eoe_man.unix

usr/share/catman/a_man/cat1/mediad.z

patchSG0003192.eoe_sw.rm_media

etc/config/mediad.options
usr/etc/mediad
usr/relnotes/patchSG0003192/TC
usr/relnotes/patchSG0003192/ch1.z

Download Server	File Name	Date Added	Size	Download
download.sgi.com	patchSG0003192.tar	12-Jun-1998	100 K	FTP	HTTP
download.sgi.com	patchSG0003192.tardist	12-Jun-1998	100 K	FTP	HTTP
FTP = download using FTP protocol HTTP = download using HTTP protocol = store in your basket for downloading later